Mika Micky Bedside Sleeper Bassinet – Assembly Instructions & Features
Our bedside sleeper bassinet brings your newborn within arm’s reach for safe, convenient nighttime care. Designed with busy parents in mind, the entire unit assembles in under 10 minutes without tools, so you can set up a secure sleep space the moment it arrives.
The height-adjustable frame fits most bed heights, while the drop-down side panel allows easy access for feeding and soothing without leaving your mattress. We built this bassinet with breathable mesh sides, a water-resistant mattress pad, and a sturdy steel frame that meets all current safety standards for infant sleep products.
What makes our bedside sleeper unique
Step-by-Step Mika Micky Bassinet Assembly
We engineered the mika micky bassinet assembly process to be completely intuitive, even if you’ve never put together baby furniture before. Start by unpacking all components and laying them on a clean surface—you’ll find four vertical support poles (color-coded with matching connectors), the mesh bassinet basket, the base frame with attached wheels, and the mattress board.
Snap the vertical poles into the base corners until you hear a click, matching the color dots on each piece. Slide the fabric basket over the frame, securing the Velcro tabs at each corner, then drop the mattress board into the basket’s bottom panel. Attach the side-panel zipper, lock the drop-down mechanism, and adjust the height using the push-button releases on each pole.
Height Adjustment & Bedside Attachment
Our six-position height system accommodates platform beds, pillowtop mattresses, and everything in between. Press the spring-loaded buttons on each vertical pole simultaneously, then slide the basket up or down to your desired level—the poles lock automatically when you release the buttons.
For true bedside co-sleeping, position the bassinet flush against your mattress with the drop-down panel facing you, then tighten the bed strap (included) around your bed frame to prevent any gap. The top of the bassinet mattress should align within 2 inches of your mattress height for safe, comfortable access.
Materials & Safety Standards
We construct every bassinet with a powder-coated steel frame that resists scratches and supports up to 20 pounds, paired with breathable polyester mesh that’s free from BPA, phthalates, and lead. The water-resistant mattress pad features a thin, firm sleep surface recommended by pediatric sleep experts—we intentionally designed it without extra padding to reduce suffocation risk.
Our bassinets meet ASTM F2906 safety standards for bedside sleepers and CPSC regulations for bassinet/cradle products. Each unit undergoes stability testing to ensure it won’t tip during typical use, and the mesh fabric passes flammability standards for children’s sleepwear.
More Bedside Sleep Solutions
Rated 4.8 by verified buyers
Your Mika Micky Bassinet Assembly Questions Answered
Most parents complete the mika micky bassinet assembly in 8 to 10 minutes without tools. The color-coded connectors snap together quickly, and the fabric basket slides over the frame with simple Velcro attachments.
If it’s your first time assembling furniture, allow 15 minutes to review the instructions and double-check each connection. The process involves inserting four poles into the base, attaching the basket, dropping in the mattress board, and adjusting the height.
No tools are required for mika micky bassinet assembly. The entire unit uses push-button mechanisms and Velcro fasteners that secure by hand.
All connectors come pre-attached to the correct pieces, and the color-coding system ensures you match the right poles to the right corners. You won’t need a screwdriver, wrench, or allen key at any point in the setup process.
Yes, the bassinet height adjusts easily even after full assembly. Press the spring-loaded buttons on each of the four vertical poles simultaneously, slide the basket up or down, then release to lock at any of the six height positions.
You can change the height as often as needed to match different beds or to accommodate a growing baby. The locking mechanism is secure enough to hold the weight safely but simple enough to adjust with one hand once you get the hang of it.
Our bassinet adjusts from 22 inches to 30 inches in height, measured from the floor to the top of the bassinet mattress. This range fits most standard beds, platform frames, and pillowtop mattresses.
For safe bedside co-sleeping, the bassinet mattress should align within 2 inches of your own mattress height. Measure from your floor to the top of your mattress before assembling, then set the bassinet to the closest matching position.
Yes, when properly assembled and secured with the included bed strap, the bassinet remains stable against your bed frame. The powder-coated steel construction and four locking caster wheels prevent tipping and shifting during normal use.
Always lock all four wheels when the bassinet is in bedside position, and tighten the bed strap around your bed frame to eliminate any gap. Test stability by gently rocking the bassinet before placing your baby inside—if it wobbles, recheck that all four poles are fully inserted and locked.
Yes, the bassinet disassembles as easily as it goes together, making it practical for moves or travel. Simply reverse the assembly steps: remove the mattress board, detach the fabric basket, press the pole-release buttons, and pull the poles out of the base.
The disassembled components fit in a large storage bag or suitcase. Reassembly takes the same 8 to 10 minutes, and the snap-lock connectors are designed to withstand multiple assembly cycles without loosening.
If a pole doesn’t click during mika micky bassinet assembly, first confirm you’re matching the correct color dots on the pole and base corner. Each pole is labeled to fit a specific corner, and forcing the wrong pole can damage the connector.
Align the pole vertically over the base connector, then push down firmly with steady pressure until you hear and feel the click. If resistance continues, check that no fabric or packaging material is blocking the connector inside the base, and ensure the pole isn’t cross-threaded or inserted at an angle.